PLAQUES D’ALUMINIUM ALLIAGE 6082 T651

Properties of Aluminium Alloy 6082

Aluminium alloy 6082 is typically used in highly stressed applications. It is one of the more popular alloys in its series. Aluminium plates in 6082 are most commonly used for machining. As a relatively new alloy, the higher strength of 6082 has seen it replace 6061 in many applications. The addition of a large amount of manganese controls the grain structure which in turn results in a stronger alloy. It is excellent for anodizing, corrosion resistance and toughness.

Applications of Aluminium Alloy 6082

Due to its strength and corrosion resistance, alumiunium plates of alloy 6082 are typically used in construction, transport applications, bridges, cranes, hydraulic parts, marine and aircraft industry.

Table of common sizes for Aluminium Alloy 6082

Apart from these sizes, other nonstandard sizes are available on request. Please get in touch with us with your demand.

Aluminium Sheet Thickness (mm)	Size 1000mm x 2000mm	Size 1520mm x 3020mm
15	✓	✓
20	✓	✓
25	✓	✓
30	✓	✓
40	✓	✓
50	✓	✓
75	✓	✓
100	✓	✓

 

Technical Datasheet of Aluminium Alloy 6082

Chemical Compositions of Aluminium Alloy 6082

Element	Composition %
Manganese (Mn)	0.4 – 1.00
Iron (Fe)	0.0 – 0.50
Copper (Cu)	0.0 – 0.10
Magnesium (Mg)	0.60 – 1.20
Silicon (Si)	0.70 – 1.3
Zinc (Zn)	0.0 – 0.20
Chromium (Cr)	0.0 – 0.25
Titanium (Ti)	0.0 – 0.10
Other  (Each)	0.0 – 0.05
Others (Total)	0.0 – 0.15
Aluminium (Al)	Balance

 

Mechanical Properties of Aluminium Alloy 6082

Property	Value
Yield Strength	255 Min MPa
Tensile Strength	300 Min MPa
Elongation at brake	9 Min %
Hardness Brinell	91 HB

 

Physical Properties of Aluminium Alloy 6082

Property	Value
Density	2.70 g/cm3
Melting Point	555°C
Thermal Expansion	24×10−6 /K
Modulus of Elasticity	70 GPa
Thermal Conductivity	180 W/m.K
Electrical Resistivity	0.038 ×10−6Ω.m

 

Aluminium Alloy 6082 Weldability

Good

Aluminium Alloy 6082 Fabrication/Machinability

Good