Алуминиеви боядисани рула и листа

Сплави : 1xxx, 3xxx, 5xxx,

​Състояние : H4x

​Дебелина : 0,15mm – 2mm

Ширина : max.2000mm

​Тегло: max.10 000kg

Видове бои : PE,PU,HDPE,PVDF,

• Покриви, фасади, строителни аксесоари (улуци, первази и др.)
• Изолационни панели и композитни панели
• Окачени тавани, слънцезащитни елементи (ролетни щори, жалюзи)
• Хладилници, перални машини
• Автомобилни конструкции, лодки

 Алуминиеви елоксирани рула и листа

Сплави : 1xxx, 5xxx,

​Състояние : H14/24

​Дебелина : 0,6mm – 4,0mm

​Ширина: max.2000mm

• Цветове: натурална и четкосана елоксация, тъмно сиво, кафяво, черно, жълто и др.
• Приложения: фасади, покриви, строителни аксесоари, изолационни панели и композитни панели, окачени тавани, слънцезащитни елементи (ролетни щори, жалюзи), хладилници, перални машини, автомобилни конструкции, лодки

  Алуминиеви рула

Сплави: 1050, 3003, 3005, 3105, 5005, 5754, 5083

​Състояние: 0, H1x, H2x, H3x, H4x

​Дебелина: 0,2mm – 12mm

​Ширина: 2200mm max

​Външен диаметър на ролката : Max. 1800mm

​ Вътрешен диаметър на ролката: 508mm

Тегло на рулата : Max. 9500kg

• Опаковка: Рулата са внимателно опаковани срещу повреда при съхранение и транспортиране.
• Видовете опаковки са с поглед настрани или поглед към небето, според заявката. Картоненоа сърцевина.
• Приложения: Строителство, транспорт, електрическо и електронно оборудване, стоки за бита, автомобилостроене, промишленост.
• Специално покритие: анодиран, предварително боядисан до 3 мм

  Алуминиеви ленти

Сплави: 1050, 3003, 3005, 3105, 5005, 5754, 5083

​Състояние: 0, H1x, H2x, H3x, H4x

​Дебелина: 0,2mm – 12mm

​Ширина: Min. 30mm

​Външен диаметър на ролката : Mak. 1500mm

​Вътрешен диаметър на ролката : 508mm

• Опаковка: Лентите са внимателно опаковани срещу повреда при съхранение и транспортиране. Видовете опаковки са с поглед настрани или поглед към небето, според заявката. Между две ленти се прилагат картон, фазер и дървен сепаратор.
• Приложения: Строителство, транспорт, електрическо и електронно оборудване, стоки за бита, автомобилостроене, промишленост.
• Специално покритие: анодиран, предварително боядисан до 3мм..

  Алуминиеви гладки листове и плочи

Сплави: 1050, 3003, 3005, 3105, 5005, 5456, 5754, 5083, 6061, 6082, 7075, 2024, 2017

​Състояние: 0, H1x, H2x, H3x, H4x

​Дебелина: 0,2mm – 300mm

​Ширина: 500mm – 2200mm

​Дължина: 750mm – 6000mm

Тегло на палето: 1 тон

• Опаковка: Листите и плочите са внимателно опаковани срещу повреда при съхранение и транспортиране. Възможно е полагане на хартия между слоевете на листа. Дървена каса.
• Приложения: Строителство, транспорт, електрическо и електронно оборудване, стоки за бита, автомобилостроене, промишленост.
• Специално покритие: анодиран, предварително боядисан до 3мм..

 Алуминиев рифел

​Сплави: 1050, 3003, 3005, 3105, 5005, 5754

​Състояние: H114/H18/H244

​Дебелина: 1,0mm – 5mm

Ширина: 500mm – 1500mm

Дължина: 1000mm – 4000mm

Тегло на палето: 1 тон

• Опаковка: Палетата са внимателно опаковани срещу повреда при съхранение и транспортиране.
• Приложения: Строителство, транспорт, електрическо и електронно оборудване, стоки за бита, автомобилостроене, промишленост.

Алуминиеви четкосани листа

​Сплави: 1050, 5005, 5754

​Състояние: H14/H24

​Дебелина: 1,0mm – 2,0mm

​Ширина: 1000mm – 1500mm

​Дължина: 100mm – 4000mm

​Тегло на палето: 1 тон

Алуминиеви листове и рулони тип щоко

​Дебелина: 0.20mm – 1.5mm

​Сплави: 1xxx / 3xxx

​Състояние: H12/H14/H16/H18/H22/H24/H26

• Опаковка: Плаетите са внимателно опаковани срещу повреда при съхранение и транспортиране. Възможно е полагане на хартия между слоевете на листа. Дървен палет.
• Приложения: Строителство, транспорт, домакински стоки, автомобилостроене, промишленост.

 Алуминиеви гладки листове със защитно фолио

​

​Дебелина: 0.20mm – 5.0mm

​Сплави: 1xxx, 3xxx, 5xxx

Състояние: H12/H14/H16/H18/H22/H24/H26

• Опаковка: Плетите са внимателно опаковани срещу повреда при съхранение и транспортиране. Възможно е полагени на хартия между слоевете на листа. Дървен палет.
• Приложения: Строителство, транспорт, домакински стоки, автомобилостроене, промишленост.

 Първичен алуминий на блок

• Производство на първични и вторични алуминиеви сплави по европейски стандарти или DIN и др..
• Размери: 70см x 8см x 6см.. Тегло прибл. 7,5кг..
• Пакети 500 – 1000кг..

 Алуминиеви профили MF или прахово боядисани

​

​Сплави: 1xxx, 6xxx

Състояние: T66

​Ширина: max.600mm

​Дължина: 100mm – 6000mm

 ALUMINIUM COMPOSITE

• Aluminium composite panels are lightweight cladding panels ideal for external facades. The panels are specifically designed to improve aesthetic appeal of buildings thanks to their enhanced forming and installation options.
• The high-end products consists of a fire rated (FR) or limited combustibility (A2) cores enclosed between two aluminium skins. This simple concept offers an incredible strength to weight ratio, stability, high weather resistance, outstanding surface flatness and high workability. The composite panels is recognised by Architects, Builders and Installers as the superior cladding panel solution.
• AKSAL offers a complete service to the end user. We offer panels, delivery and fabrication. As a company whose prerequisite is your satisfaction, we offer supporting aluminium systems to make installation of your metal cladding systems quick and easy.
• Aluminium Composite Panels offer a wide range of advantages over similar facade products. 

BENEFITS:

Cost effective, Robust durability & Lightweight – A 4mm thickness sheet of FR core weighs just 7.3kg per square metre. This makes the composite panels amongst the lightest available. 

Weight (KG/m²) 

Thickness

4mm

FR CORE

7.3kg

A2 CORE

7.5kg

Unlimited colour range available – We offer over 60 standard colours and offer an unlimited colour range and colour matching so that you can match your project image or company branding exactly.

Range of Finishes – Our aluminium composite panels are also available in a range of specialty finishes, including 

– ZN BOND – Zinc Composite Material (ZCM)

– CU BOND – Copper Composite Material (CCM)

– SS BOND – Stainless Steel Composite Material (SSCM)

Versatility and formability – Unlike high pressure laminates aluminium composite panels can be fabricated extensively. This allows you to create clean and stylised finishes to any building. Our panel structure means that you can mould, cut and shape material without damaging the strength or integrity of the product. You can continue facades round corners or over edges without the need of additional, expensive, profiles.

• The panels are suitable for:

· Cutting

· Shearing

· Roll-Bending

· Punching Perforating

· Drilling Folding

· CNC Routing

 ALUMINIUM EXPANDED MESH

• Expanded Aluminium Pate is both versatile and economical. It is more cost-effective compared with perforated metals. Because it is slit and expanded, it creates less materials waste during manufacturing, thus you don’t have to pay for the material loss in the production process.
• Aluminium expanded sheets have excellent strength to weight ratio and a number of patterns to choose from.
• Expanded Sheet allows easy passages of sound, air and light, with open areas ranging from 40% to 70%. It is available in most material types and finishes, and highly versatile for producing different shapes, cutting, tube and roll forming.
• Aluminium Expanded Mesh is a key material for building and architecture engineering. It is used for ventilating, security and decorations, since its openings allow the passages of air, light, heat and sound, and its material is lightweight. In addition, formed with decorative diamond pattern, expanded mesh can be used aesthetically, and may be found in applications like shelving, partitions, ceiling tiles, architectural cladding and more. It is also widely applied in filtration, laths, screen, fences or other industries.
• Surface treatment
• ​Powder coated
• ​Anodized

 SOLAR SHADING SYSTEM

• Our Solar Shading Systems are designed to provide control of daylight in buildings and to prevent energy loss.
• They are application solutions that allow light to enter the space sufficiently, also used for decorative purposes and adding aesthetic value to the structure.
• Facade systems, Skylight, Aluminum joinery can be installed on any angle.
• Profiles with QUALANOD and QUALICOAT certifications can be produced in all Ral colors and anodizing options.

 ALUMINIUM STANDING SEAM ROOFING AND CLADDING

• The standing seam metal roof and facade systems have been on the market for nearly 40 years now and have proven itself in some of the world’s most challenging climatic conditions.
• Known for its flexibility, exceptional resistance and ease of installation, it is the choice for architects across the globe looking to match high quality with design.
• The specially developed drainage channel of the panels means the system can be installed on long, flat roofs by eliminating the risk of rain leaking, whilst the special resin based clips used for installation allow for free thermal expansion of the panels without running the risk of damaging the clips or panels themselves.

 CERAMIC TILES

• Ceramic tiles today considered to be the most efficient, safest form of exterior cladding.
• Ventilated facades ensure high energy savings for buildings of up to 20 or 30%. In addition, their different layers improve on buildings’ sound insulation, a factor of major importance in cities with high noise levels.
• The installation system minimizes execution times, and ventilated facades only require minimal maintenance. In addition, broken tiles can easily be replaced with no need for building work.

 TERRACOTA FACADE SYSTEM

• The terracotta extruded tiles are designed with a wide range of formats, colors and finishes to create a building with a modern, innovative appearance whilst at the same time, preserving the traditional appearance of terracotta.
• The environmentally friendly material can withstand the coldest winters and warmest summers, with little to no maintenance. Thanks to its natural composition and production under high temperatures, the baked clay panels come as standard with an A1 class fire rating. Furthermore, terracotta ventilated facade panels naturally provide thermal benefits to boost the thermal efficiency of buildings.
• Thanks to its ability to reflect external noise pollution, terracotta ventilated facades has a high level of acoustic reduction.
• The panels reaction to fire is achieving an A1 rating. Thanks to the low absorption (less than 1%) properties of terracotta, environmental pollution does not tend to penetrate the panel surface, therefore rainwater usually provides a sufficient clean to restore panels to their best.
• A1 fire rating
• Moisture resistant
• No maintenance
• Sustainable material

 HPL поскости

• HPL EXTERIOR е направен за всички външни приложения. Oсвен за използването му като фасаден облицовъчен материал, може да се използва и за всякакви други приложения на открито, като балкони, външни мебели, слънце защита, навеси, парапети, табели, веранди , балюстради, декоративни огради, щори и широк спектър от други външни приложения.
• HPL EXTERIOR е изключително устойчив на атмосферни влияния, самоносещ се, здрав, твърд композитен материал, произведен при висока температура от 150 градуса по Целзий и с голямо налягане в 9 мегапаскала.
• Сърцевината на материала се състои от импрегнирани с фенолна смола дървесни наситени слоеве крафт хартия.
• Декоративните повърхности са направени от термореактивни смоли, импрегнирани с декоративни дървесни целулозни слоеве хартия, подсилени с UV устойчиви фолиа.

• Панелите HPL EXTERIOR се предлагат в стандартно качество (HPL EXTERIOR) и огнеустойчиво качество (HPL EXTERIOR-FR).

• Дебелина: 4 мм – 18 мм (през 2 мм)
• Стандартни производствени размери:(ширина) 1250 x (дължина) 2500 / 2800/3000 мм
• Специално производство и рязане се извършват според проекта.

 FIBER CEMENT

• Fiber cement boards have been produced relatively recently, but technology has been quickly perfected to achieve a lasting, durable and aesthetically beautiful facade material.
• The components are reinforced cement with cellulose fiber. It offers aesthetically different surfaces: smooth, wood textured imitation, natural stone, edged bricks and others.
• Fibro cement is an ecological material, it does not contain any harmful particles. Long lasting and durable material.
• During production, the boards are subjected to high temperature pressures, hence the board are highly resistant to the most aggressive conditions.

• No affect by UV rays, moisture and water. The boards do not affect by bad environmental conditions, as well as the temperature expansions is and much smaller than other façade materials. They have good insulation properties and sound-proofing qualities.
• Fiber Cement is not flammable. The material is becoming more and more important in building holding fire classification (Class A1,s1,d0; EN 13501-1).
• Surface effects: Flat, Wood, Stone

• Thickness: 4 mm – 18 mm (By increasing 2 mm)
• Standard Production Dimensions: (width) 1250 x (length) 2500/ 2800/3000 mm
• Special production and cutting are performed according to the project.

 COPPER AND ARCHITECTURAL SOLUTIONS

• Thanks to their excellent physical properties and significant advantages, copper and zinc are considered to be two of the ideal materials used in architecture.
• To Design a facade of a building with copper and zinc provides many opportunities for innovation. The impressive natural surfaces of copper, zinc and copper alloys allow a unique design. Prefabricated system elements of the system offer a wide range of solutions, from complex-form projects to simple and economical cladding of larger areas.
• Once placed, AKSAL’s products come alive and become even more beautiful over time.
• Their main application in building architecture is for facades and roofs. Copper and zinc roofs offer unparalleled aesthetics.

 COPPER AND ROOF SOLUTIONS

• AKSAL Copper Sheets and Coils are manufactured in state-of-the-art production facilities. Made of Cu-DHP oxygen-free, phosphorus- deoxidised copper with limited residual phosphorus. Cu-DHP is suitable for welding and soldering and is at least 99.9% (pure copper). Cu-DHP is extremely malleable regardless of the temperature or the direction of rolling. Both roof and façade materials exceed the requirements of EN 1172 regarding tolerances and, most importantly, the properties of the material. This gives the facade or the roof an excellent appearance.
• AKSAL Copper Sheets and Coils are produced with a bright and shiny copper surface. After installation, it develops a matt, dark brown surface due to the naturally natural oxidation from the atmosphere. During the initial oxidation, before the dark-brown oxide layer is found on the surface of the copper, a number of brown shades and even purple nuances can develop. Over time, the typical copper green patina develops. This gives the building a unique accent and the protective character of the patinated layer contributes to the exceptional longevity of the material.

 Цинкови фасадни системи

• Цинкът е отличен покривен и облицовъчен материал, който дава дълъг живот на сградата.
• Фасадната облицовка с цинк от AKSAL има безкрайна красота, не се нуждае от поддръжка и ще осигури надеждна защита за поколенията.
• Освен изключителните материални свойства на цинка и неговия привлекателен външен вид, този естествен материал има и други устойчиви качества, като: не запалим и може да предпазва сградите от мълния.

 Цинкови покривни системи

• Произведени за да служат поколения наред, цинковите покриви осигуряват безпроблемна, устойчива защита на сградата. Цинкът е използван в това приложение повече от 150 години. В продължение на десетилетия е предпочитан избор за метални покриви по целия свят. Той печели клиентите с висококачествена изработка и впечатлява със своя безкраен стил.
• Метални покривни покрития, изработени от цинк, поставят критерии, гарантиращи функционалност и естетичен облик в продължение на години.
• Цинковите метални покривни конструкция не се нуждаят от поддръжка и защитават сградата, като изглеждат все така привлекателни.

 ROOF PUR PANELS

• The PSR1000 is a roof covering system. It consists of two steel plates and a polyurethane foam core. The PSR1000 roof system provides easy and fast installation, high thermal insulation and waterproofing.
• PSR1000 roof panels can be combined with dual layer translucent polyester panels that provide natural lighting in the area covered, contributing significantly to energy savings.
• The panels are mainly produced with galvanized and pre-painted steel sheets. Production with aluminum sheets and stainless steel is possible upon request.
• Available lengths from 0.5 to 16 meters. For longer lengths please contact us.
• The PSR1000 roof covering system can be used in numerous applications such as roofs of metal buildings, canopies, parking lots, sports facilities, bungalows, mobile homes and many other constructions.
• ​The roof panels can also (under certain conditions) be installed in buildings with special architectural requirements such as curved roofs.
• ​Roof panels are also available in PIR core fire resistant up to 30min.

FACADE PUR PANELS

• PSCW1000 wall cladding system is a structural element for the side (wall) coverage of buildings. It is composed of two steel sheets separated by a core of polyurethane foam. The PSCW1000 system is easy and fast to install and offers high thermal and water insulation.
• The PSCW1000 wall panels are available with insulation thickness from 30mm to 100mm and in 6 different designs which may be combined to offer a superior aesthetic and functional walling result.
• All insulation thicknesses are available with concealed fixation (the screw is not visible) at no extra charge.
• While panels are usually produced with pre-painted galvanized steel sheets they can also be produced using aluminium or stainless steel sheets. For special requests please contact us.
• Panels are available in lengths from 0,50 to 15 meters. Longer lengths may be considered upon request.
• The PSCW1000 wall cladding system can be used in numerous applications such metal buildings, sports facilities, partitions, food processing areas, bungalows, mobile homes and many other constructions.
• ​Roof panels are also available in PIR core fire resistant up to 30min.

FRIGO PANELS

• PSF1000 frigo panels are structural elements for construction of refrigeration units as well food processing and production areas. Each panel is composed of two steel sheets separated by a core of polyurethane foam.
• Easy and rapid installation combined with excellent fastening between panels make the PSF1000 system an ideal solution for all industrial refrigeration applications.
• The PSF1000 frigo panels are available with insulation thickness from 80mm to 200mm. PIR composition is available for 80mm, 100mm and 120mm. Concealed fastening, where the fastening screws are not visible, is additionally available in 80mm and 100mm panels at no extra charge.
• While panels are usually produced with pre-painted galvanized steel sheets they can also be produced using aluminium or stainless steel sheets. For special requests please contact us.
• Panels are available in lengths from 0,50 to 15 meters. Greater lengths may be considered upon request.