Facades

  Pre-painted Aluminium





Alloys : 1050, 5005, 5754

Thickness : 0,15mm – 3mm

Width : max.2400mm

Type of paints: PE, PU, HDPE, 2PVDF, 3PVDF

 

 

  • To provide color consistent paint and surface resistance, our pre-painted aluminium is coated through a continuous production process. The solid colours and metallic paints are applied in two or four layers, after which they are permanently sealed.
  • For high quality architectural applications, we use only PVdF (Polyvinylid Fluoride) paints of the highest quality (80/20). Mainly with inorganic pigments, these PVdF paints are ideal for outdoor applications. This helps to protect the pre-painted aluminium to make the façade material weatherproof, UV resistant and possible to be applied close to seawater.
  • With such protection, any kind of environmental impact on the material is minimal. Extreme climatic zones also do not pose a threat to the pre-painted aluminium surface.

Application:

  • Facade panels and claddings, roofing systems, gutters, sill drips and more
  • Suspended ceilings, sunscreens, shutters, blinds
  • Insulation panels

 Anodised aluminium





Alloys : 5005, 5754,

Thickness : 0,6mm – 4,0mm

Width : max.2000mm

The anodizing process is protecting the aluminium surface from undue damage and wear, anodizing aluminium adds a protective coating of aluminium oxide to the metal itself.

  • The durability and longevity of the finish is in direct correlation to how thick the applied coating actually is. Aluminium oxide is extremely strong and effective against weathering, but the process allows you to color the metal with dyes without the chance of future flaking or peeling due to the electrochemical bonding process.
  • Ease of Maintenance. Anodized surfaces sometimes take on dirt and stains, but through a simple cleaning process (usually a mild detergent will do it) you can restore the finish to like-new status.
  • Cost. A lower initial finishing cost combines with lower maintenance costs for greater long-term value.
  • Health and Safety. Anodizing is a safe process that is not harmful to human health. An anodized finish is chemically stable, will not decompose; is non-toxic; and is heat-resistant to the melting point of aluminium.

Applications:

    • Facade panels and claddings, roofing systems, gutters, sill drips and more
    • Suspended ceilings, sunscreens, shutters, blinds
    • Insulation panels

 Aluminium Brushed Sheets





  • Alloys : 1050, 5005, 5754
  • Tempers: H14/H24
  • Thickness : 1,0mm – 2,0mm
  • Width : 1000mm – 1500mm
  • Length : 100mm – 4000mm
  • Stack weight : 1 ton

 ALUMINIUM EXPANDED MESH





    • Expanded Aluminium Pate is both versatile and economical. It is more cost-effective compared with perforated metals. Because it is slit and expanded, it creates less materials waste during manufacturing, thus you don’t have to pay for the material loss in the production process.
  • Aluminium expanded sheets have excellent strength to weight ratio and a number of patterns to choose from.
  • Expanded Sheet allows easy passages of sound, air and light, with open areas ranging from 40% to 70%. It is available in most material types and finishes, and highly versatile for producing different shapes, cutting, tube and roll forming.
  • Aluminium Expanded Mesh is a key material for building and architecture engineering. It is used for ventilating, security and decorations, since its openings allow the passages of air, light, heat and sound, and its material is lightweight. In addition, formed with decorative diamond pattern, expanded mesh can be used aesthetically, and may be found in applications like shelving, partitions, ceiling tiles, architectural cladding and more. It is also widely applied in filtration, laths, screen, fences or other industries.
  • Surface treatment
    • ​Powder coated
    • ​Anodized

 

  DOUBLE SKIN FACADES

 

     

   

   

     

  • The perforated double facades of buildings alter the traditional design. It is a new style in architecture and its handwriting is becoming more and more visible.
  • If you pay attention to these perforated building facades, they redefine the traditional glass and aluminium frame outlook. The facade of the building is its signature and the way it presents itself to the world. The facade design of a building is according to the environment in which it will be built. The different designs of perforation of aluminum panels give the possibility to adapt the project according to its functionality. Whether it be a mega mall, an office building, an apartment building or even a family house, the perforated designs are a unique and great source for any kind of ideas with unconventional characteristics.
  • The facade of the building is the first signal that tells us what type of building it is. And with the perforation and its various forms, the creative vision of the architect and the desire to impress with something unique and unusual becomes something easily feasible. With so many things that could stand out, we can always expect unexpected surprises.
  • The perforated aluminum panel is lightweight, highly efficient with a suitable alloy. The patterns can be perforated shapes or stretched mesh. All these perforations can be combined with 3D shapes, which can make the building even more vivid.

AKSAL LTD, can offer to the final client ready-made perforated panels with 3D shapes with electrostatic powder coating or anodizing, satin mirror or matt effect.

 ALUMINIUM COMPOSITE





    • Aluminium composite panels are lightweight cladding panels ideal for external facades. The panels are specifically designed to improve aesthetic appeal of buildings thanks to their enhanced forming and installation options.
    • The high-end products consists of a fire rated (FR) or limited combustibility (A2) cores enclosed between two aluminium skins. This simple concept offers an incredible strength to weight ratio, stability, high weather resistance, outstanding surface flatness and high workability. The composite panels is recognised by Architects, Builders and Installers as the superior cladding panel solution.
    • AKSAL offers a complete service to the end user. We offer panels, delivery and fabrication. As a company whose prerequisite is your satisfaction, we offer supporting aluminium systems to make installation of your metal cladding systems quick and easy.
    • Aluminium Composite Panels offer a wide range of advantages over similar facade products.

BENEFITS:

 

Cost effective, Robust durability & Lightweight – A 4mm thickness sheet of FR core weighs just 7.3kg per square metre. This makes the composite panels amongst the lightest available.

Weight (KG/m²)

Thickness

4mm

FR CORE

7.3kg

A2 CORE

7.5kg

   
 

Unlimited colour range available – We offer over 60 standard colours and offer an unlimited colour range and colour matching so that you can match your project image or company branding exactly.

Range of Finishes – Our aluminium composite panels are also available in a range of specialty finishes, including

– ZN BOND – Zinc Composite Material (ZCM)

– CU BOND – Copper Composite Material (CCM)

– SS BOND – Stainless Steel Composite Material (SSCM)

Versatility and formability – Unlike high pressure laminates aluminium composite panels can be fabricated extensively. This allows you to create clean and stylised finishes to any building. Our panel structure means that you can mould, cut and shape material without damaging the strength or integrity of the product. You can continue facades round corners or over edges without the need of additional, expensive, profiles.

    • The panels are suitable for:

· Cutting

· Shearing

· Roll-Bending

· Punching Perforating

· Drilling Folding

· CNC Routing

 SOLAR SHADING SYSTEM





    • Our Solar Shading Systems are designed to provide control of daylight in buildings and to prevent energy loss.
  • They are application solutions that allow light to enter the space sufficiently, also used for decorative purposes and adding aesthetic value to the structure.
  • Facade systems, Skylight, Aluminum joinery can be installed on any angle.
  • Profiles with QUALANOD and QUALICOAT certifications can be produced in all Ral colors and anodizing options.

 ALUMINIUM STANDING SEAM ROOFING AND CLADDING





  • The standing seam metal roof and facade systems have been on the market for nearly 40 years now and have proven itself in some of the world’s most challenging climatic conditions.
  • Known for its flexibility, exceptional resistance and ease of installation, it is the choice for architects across the globe looking to match high quality with design.
  • The specially developed drainage channel of the panels means the system can be installed on long, flat roofs by eliminating the risk of rain leaking, whilst the special resin based clips used for installation allow for free thermal expansion of the panels without running the risk of damaging the clips or panels themselves.

 CERAMIC TILES





  • Ceramic tiles today considered to be the most efficient, safest form of exterior cladding.
  • Ventilated facades ensure high energy savings for buildings of up to 20 or 30%. In addition, their different layers improve on buildings’ sound insulation, a factor of major importance in cities with high noise levels.
  • The installation system minimizes execution times, and ventilated facades only require minimal maintenance. In addition, broken tiles can easily be replaced with no need for building work.

 TERRACOTA FACADE SYSTEM





    • The terracotta extruded tiles are designed with a wide range of formats, colors and finishes to create a building with a modern, innovative appearance whilst at the same time, preserving the traditional appearance of terracotta.
    • The environmentally friendly material can withstand the coldest winters and warmest summers, with little to no maintenance. Thanks to its natural composition and production under high temperatures, the baked clay panels come as standard with an A1 class fire rating. Furthermore, terracotta ventilated facade panels naturally provide thermal benefits to boost the thermal efficiency of buildings.
    • Thanks to its ability to reflect external noise pollution, terracotta ventilated facades has a high level of acoustic reduction.
    • The panels reaction to fire is achieving an A1 rating. Thanks to the low absorption (less than 1%) properties of terracotta, environmental pollution does not tend to penetrate the panel surface, therefore rainwater usually provides a sufficient clean to restore panels to their best.
    • A1 fire rating
    • Moisture resistant
    • No maintenance
    • Sustainable material

 KLINKER BRICKS FOR THE FACADES







 

  • Its special weight is lighter than the natural stone and classic concrete therefore it reduces the dead load and does not create an undue burden.
  • Affordable, durable, easy and fast installation
  • Specification of being painted with the desired color option.
  • It provides excellent resistance to external influences. GRC is waterproof and does not crack.
  • Implementation of T aluminum profiles.
  • Fire Resistance – А1
  • Water Resistance – R7
  • Wind Load Resistance – 8000Pa

 HPL HIGH PRESSURE LAMINATE





  • HPL EXTERIOR is made for all external applications. In addition to its use as a facade cladding, it can also be used for any outdoor applications such as balconies, outdoor furniture, sun protection, sheds, railings, signs, porches, balustrades, decorative fences, blinds and a wide range of other exterior applications.
  • HPL EXTERIOR is extremely weather-resistant, self-supporting, robust, rigid composite material manufactured at a high temperature of 150 degrees Celsius and with a high pressure of 9 megapascals.
  • The core of the material consists of phenolic resin impregnated wood saturated layers of kraft paper.
  • Decorative surfaces are made of thermo-reactive resins impregnated with decorative wood cellulose layers of paper, reinforced with UV resistant foils.
    • HPL EXTERIOR panels are available in standard quality (HPL EXTERIOR) and fire resistant (HPL EXTERIOR-FR, B s2 d0).
  • Thickness: 2 mm – 18 mm (By increasing 2 mm)
  • Standard Production Dimensions: (width) 1300 x (length) 2800/3050 mm
  • Special production and cutting are performed according to the project.

 FIBER CEMENT





  • Fiber cement boards have been produced relatively recently, but technology has been quickly perfected to achieve a lasting, durable and aesthetically beautiful facade material.
  • The components are reinforced cement with cellulose fiber. It offers aesthetically different surfaces: smooth, wood textured imitation, natural stone, edged bricks and others.
  • Fibro cement is an ecological material, it does not contain any harmful particles. Long lasting and durable material.
  • During production, the boards are subjected to high temperature pressures, hence the board are highly resistant to the most aggressive conditions.
  • No affect by UV rays, moisture and water. The boards do not affect by bad environmental conditions, as well as the temperature expansions is and much smaller than other façade materials. They have good insulation properties and sound-proofing qualities.
  • Fiber Cement is not flammable. The material is becoming more and more important in building holding fire classification (Class A1,s1,d0; EN 13501-1).
  • Surface effects: Flat, Wood, Stone
  • Thickness: 4 mm – 18 mm (By increasing 2 mm)
  • Standard Production Dimensions: (width) 1250 x (length) 2500/ 2800/3000 mm
  • Special production and cutting are performed according to the project.

 COPPER AND ARCHITECTURAL SOLUTIONS





  • Thanks to their excellent physical properties and significant advantages, copper and zinc are considered to be two of the ideal materials used in architecture.
  • To Design a facade of a building with copper and zinc provides many opportunities for innovation. The impressive natural surfaces of copper, zinc and copper alloys allow a unique design. Prefabricated system elements of the system offer a wide range of solutions, from complex-form projects to simple and economical cladding of larger areas.
  • Once placed, AKSAL’s products come alive and become even more beautiful over time.
  • Their main application in building architecture is for facades and roofs. Copper and zinc roofs offer unparalleled aesthetics.

 COPPER AND ROOF SOLUTIONS





  • AKSAL Copper Sheets and Coils are manufactured in state-of-the-art production facilities. Made of Cu-DHP oxygen-free, phosphorus- deoxidised copper with limited residual phosphorus. Cu-DHP is suitable for welding and soldering and is at least 99.9% (pure copper). Cu-DHP is extremely malleable regardless of the temperature or the direction of rolling. Both roof and façade materials exceed the requirements of EN 1172 regarding tolerances and, most importantly, the properties of the material. This gives the facade or the roof an excellent appearance.
  • AKSAL Copper Sheets and Coils are produced with a bright and shiny copper surface. After installation, it develops a matt, dark brown surface due to the naturally natural oxidation from the atmosphere. During the initial oxidation, before the dark-brown oxide layer is found on the surface of the copper, a number of brown shades and even purple nuances can develop. Over time, the typical copper green patina develops. This gives the building a unique accent and the protective character of the patinated layer contributes to the exceptional longevity of the material.

 ZINC FACADE SYSTEMS





  • Zinc is an excellent roofing and cladding material that gives building sustainability.
  • AKSAL facade zinc coating has infinite beauty, is completely maintenance-free and reliable protection for generations.
  • Besides the exceptional material properties of zinc and its attractive appearance, this natural material also has other properties such as: not flammable and can protect buildings from lightning.

 ZINC ROOFING SYSTEMS





    • Designed to serve generations, zinc roofs provide durable and sustainable protection for the building. Zinc has been used in this application for over 150 years. For decades it has been the preferred choice for metal roofs around the world. It wins the customers with high quality craftsmanship and impresses with its endless style.
    • Zinc metal coatings set criteria that ensure functionality and aesthetic look for years.
    • Zinc metal roofing structures do not need maintenance and protect the building while still looking attractive.

 GLASS RAILING SYSTEMS






  • Glass railings can be of different types of mountings (hidden, side, upper, etc.), which gives the freedom to the architects to use their imagination when creating the exterior and interior design of the project.
  • The thickness of the glass should be between 12 – 21.52 mm.
  • Slim and elegant design.
  • Quick installation with ready-made openings.
  • Internal drainage openings in case of rain.
  • Unlimited transparency.

 ROOF PUR PANELS



    • The PSR1000 is a roof covering system. It consists of two steel plates and a polyurethane foam core. The PSR1000 roof system provides easy and fast installation, high thermal insulation and waterproofing.
  • PSR1000 roof panels can be combined with dual layer translucent polyester panels that provide natural lighting in the area covered, contributing significantly to energy savings.
  • The panels are mainly produced with galvanized and pre-painted steel sheets. Production with aluminum sheets and stainless steel is possible upon request.
  • Available lengths from 0.5 to 16 meters. For longer lengths please contact us.
  • The PSR1000 roof covering system can be used in numerous applications such as roofs of metal buildings, canopies, parking lots, sports facilities, bungalows, mobile homes and many other constructions.
  • ​The roof panels can also (under certain conditions) be installed in buildings with special architectural requirements such as curved roofs.
  • ​Roof panels are also available in PIR core fire resistant up to 30min.

FACADE PUR PANELS





    • PSCW1000 wall cladding system is a structural element for the side (wall) coverage of buildings. It is composed of two steel sheets separated by a core of polyurethane foam. The PSCW1000 system is easy and fast to install and offers high thermal and water insulation.
  • The PSCW1000 wall panels are available with insulation thickness from 30mm to 100mm and in 6 different designs which may be combined to offer a superior aesthetic and functional walling result.
  • All insulation thicknesses are available with concealed fixation (the screw is not visible) at no extra charge.
  • While panels are usually produced with pre-painted galvanized steel sheets they can also be produced using aluminium or stainless steel sheets. For special requests please contact us.
  • Panels are available in lengths from 0,50 to 15 meters. Longer lengths may be considered upon request.
  • The PSCW1000 wall cladding system can be used in numerous applications such metal buildings, sports facilities, partitions, food processing areas, bungalows, mobile homes and many other constructions.
  • ​Roof panels are also available in PIR core fire resistant up to 30min.

FRIGO PANELS



    • PSF1000 frigo panels are structural elements for construction of refrigeration units as well food processing and production areas. Each panel is composed of two steel sheets separated by a core of polyurethane foam.
  • Easy and rapid installation combined with excellent fastening between panels make the PSF1000 system an ideal solution for all industrial refrigeration applications.
  • The PSF1000 frigo panels are available with insulation thickness from 80mm to 200mm. PIR composition is available for 80mm, 100mm and 120mm. Concealed fastening, where the fastening screws are not visible, is additionally available in 80mm and 100mm panels at no extra charge.
  • While panels are usually produced with pre-painted galvanized steel sheets they can also be produced using aluminium or stainless steel sheets. For special requests please contact us.
  • Panels are available in lengths from 0,50 to 15 meters. Greater lengths may be considered upon request.